Yamaha Tio1608-D2 Dante-Equipped I/O Rack
Features
- Works Remotely with TF Series & DM3
- Cable Connection to Console via Dante
- Preamp with Balanced Inputs & Outputs
- 16 Combo XLR-1/4" Input Jacks
- 8 XLR Output Jacks
- Supports 48V Phantom Power
Description
Simplify your live sound or studio setup with the Yamaha Tio1608-D2 Dante-Equipped I/O Rack, a rack that is compatible with Dante and comes with 16 mic/line inputs and 8 line outputs. It can remotely control gain from TF Series and DM3 consoles, allowing you to create a simple stagebox system. The Tio1608-D2 is also versatile, supporting 96k and making it ideal for use as an I/O rack in large installations with products like the RIVAGE PM or DME7.
The DM3 and TF series, as well as the CL and QL digital mixers, use the Dante audio network standard. These consoles can be combined with the Tio1608-D2 or an R series I/O rack to create a system that suits your desired scale and budget. Patching can be enabled using "Dante Controller," while "R Remote" software allows for control of Remote HA. The 2 RU Tio1608-D2 comes with a standard IEC power cord and four rubber feet.
Specifications
General | |
Compatibility | Yamaha TF / DM3 |
Sample Rate | 44.1, 48, 88.2, 96 kHz |
Latency | <1.3ms Input to Output, Connect with DM3, Dante Receive Latency Set to 0.25 ms (One Way), Fs=96 kHz <2.6 ms Input to Output, Connect with DM3, Dante Receive Latency set to 0.25 ms (One Way), Fs=48 kHz |
THD | <0.2% +4 dBu at 20 Hz to 20 kHz into 600 Ohms, Gain = +66 dB <0.05% +4 dBu at 20 Hz to 20 kHz into 600 Ohms, Gain = -6 dB, Input to Output, Fs=88.2 kHz, 96 kHz <0.1% +4 dBu 20 Hz to 20 kHz into 600 Ohms, Gain = +66 dB <0.05% +4 dBu 20 Hz to 20 kHz into 600 Ohms, Gain= -6 dB, Input to Output, Fs=44.1 kHz, 48 kHz (Measured with a -18 dB/Octave Filter at 80 kHz) |
Frequency Response | +0.5, -1.5 dB 20 Hz to 20 kHz, Refer to the Nominal Output Level at 1 kHz, Input to Output |
Dynamic Range | 108 dB, Input to Output, Gain = -6 dB / 110 dB, DA Convertor, Fs 96 kHz 108 dB, Input to Output, Gain = -6 dB / 112 dB, DA Convertor, Fs 48 kHz |
EIN | -128 dBu, Gain = +66 dB, Fs 96 kHz, 48 kHz (Measured with A-Weighting Filter) |
Noise | Residual Output Noise: -86 dBu, Fs 96 kHz / -88 dBu, Fs 48 kHz, ST Main Off (Measured with A-Weighting Filter) |
Crosstalk | -100 dB, Adjacent Input/Output Channels, Input Gain = -6 dB (Measured with a -30 dB/Octave Filter at 22 kHz) |
Gain | -6 to +66 dB |
Impedance | Actual Load Impedance: 7.5 Kilohms Mic Input: 50 to 600 Ohms Line Input: 600 Ohms Actual Source: 75 Ohms Line Output: 600 Ohms |
Input Level | Sensitivity Mic: -82 dBu (61.6 μV) Line: +10 dBu (245 mV) Nominal Mic: -62 dBu (0.616 mV) Line: +10 dBu (2.45 V) Max Before Clipping Mic: -42 dBu (6.16 mV) Line: +30 dBu (24.5 V) |
Output Level | Nominal: +4 dBu (1.23 V) Maximum Before Clipping: +24 dBu (12.3 V) |
Inputs / Outputs | |
Audio I/O | 16x Combo XLR-1/4" 3-Pin Line/Mic Input 8x XLR 3-Pin Line Output |
Digital I/O | Dante: 2 x etherCON Cat 5e (Primary and Secondary) Data Length: 24- or 32-Bit Level: 1000Base-T Audio: 16 Channels (Tio1608-D2 to Other Devices) 8 Channels (Other Devices to Tio1608-D2) |
Power | |
Power Source | AC Input (Included) |
AC Input Power | 100 to 240 VAC, 50 / 60 Hz |
Power Consumption | 50 W |
Environmental | |
Operating Temperature | 32 to 104°F / 0 to 40°C |
Storage Temperature | -4 to 140°F / -20 to 60°C |
Physical | |
Mounting | Side: 4x Rackmount |
Colour | Black |
Material of Construction | Metal |
Cable Length | Not Specified by Manufacturer |
Dimensions | 18.9 x 14.4 x 3.5" / 48 x 36.6 x 8.9 cm |
Weight | 12.6 lb / 5.7 kg |
In The Box
- Yamaha Tio1608-D2 Dante-Equipped I/O Rack
- Power Cord
- Rubber Feet
Reviews
(no ratings yet)Give it a quick rating:
Thanks for your rating!
Write a review
Details
- Product: Yamaha Tio1608-D2 Dante-Equipped I/O Rack
- Manufacturer: Yamaha
- Model: TIO1608-D2
- SKU: TIO1608-D2
- RM Product #: 113426
- Warranty: Click here for warranty terms view terms