Processors & Effects

Passive DI Box. Instrument/Line in switch. Ground lift switch to eliminate hum.

• Unbalanced 1/4" Inputs.
• Balanced XLR Outputs.
• Passive Operation.
• Ground Lift.

• Balanced XLR Outputs
• Transformer Isolation
• Provides Ground Isolation
• Stereo/Mono Switch
• USB Powered

• Beating heart of the most iconic optical compressors ever made

• Unbalanced 1/4" and XLR Inputs.
• Balanced XLR Output.
• Battery or Phantom Powered.

• Dual Channel
• Passive
• 1/4" Mono, 1/8" Stereo and RCA Inputs
• Input Level Controls
• Ground Lift Switches

• Connect Line/Hi-Z Signals to Mic Inputs.
• 1/4" Input.
• Parallel Thru-Put for Amp Connections.
• Line/Instrument Switch.
• Passive Design for Active Instruments.

• Connects a Mobile Device to a PA/Mixer
• 3.5mm TRS Male Plug on 5' Attached Cable
• Switchable -15 dB Pad
• Custom-Wound Transformers
• 2 x 1/4" TRS Outputs
• Balanced XLR 3-Pin Output

• Passive re-amping device
• Allows for playing prerecorded tracks through amplifiers and pedals and re-record the results
• Level control for fine tuning the gain
• Ground lift switch, when activated helps to reduce hum and buzz caused by ground loops

• For Stage & Home Recording Studio Use
• Handles High-Output Instruments
• Transformer Isolated, No Ground Loops

• Increased Dynamic Range and Headroom
• 48V Phantom Powered & Switching Supply
• -15 dB Pad Switch

• 12 dB/Octave Rolloff
• Stereo RCA Input and Outputs
• 50 Hz to 2.5 kHz Crossover Range
• Mono Sub Output
• External Power Supply for Low Noise Operation

• TSAC-HD Pre-Effects and Amp Modeling
• Core-Image Post-Effects
• Quick Tone™ Edit Software
• Supports 3rd-party IRs to Expand Sound Ability
• 56 Drum Beats & 60sec Phrase Loop Synchronization
• Global 3 Bands EQ for Quick Adjustment

• Premium Performance.
• Rugged Design.
• Stackable Chassis with Durable Rubber Foot.
• Gold-plated Neutrik XLR Connector.

• For Multimedia Applications
• Mono 1/4", Stereo RCA, and 3.5mm Inputs
• Mono XLR Line-Level Input
• Mic-Level Mono Sum at XLR Out
• -15 dB Pad

• 16 Voice Effects
• Compression, Reverb, Delay, and Enhance
• Adds up to 2 Voices for 3-Part Harmonies
• XLR Mic Input with 48V Phantom Power
• 3.5mm Stereo Aux Input

• Pristine Audio Fidelity
• Ground Lift Switch
• Voltage Gain Selector

• Connect Line/Hi-Z Signals to Mic Inputs.
• 1/4" Input.
• Parallel Thru-Put for Amp Connections.
• Line/Instrument Switch.
• Active Design for Passive Instruments.

• Selectable Active/Passive Pickup Input.
• Z-Tone Variable Impedance.
• Switchable Pure/JFET Channel Tone.
• Switchable -20 dB Pad.
• 1/4" Thru and Main Outputs.

• Active.
• Polarity Switch.
• Ground Lift Switch.
• Rugged Construction.

• For Keyboards
• 2 x 1/4" Inputs with Thru Outputs
• -15 dB Pad for Active Instruments
• Handles Huge Transients without Chocking

• Selectable Active/Passive Pickup Input.
• Z-Tone Variable Impedance.
• Switchable Pure/JFET Channel Tone.
• Buffers Signal for Long Cable Runs.
• Boost Circuit Adds Volume and Drive.

• Dual Channel.
• Stereo or Dual-Mono.
• Classic dbx "Auto" Mode.
• Side Chain Insert.
• Separate LED Displays.

• Single Channel
• Battery or Phantom Powered
• Ground Lift
• Input Pad
• Rugged Enclosure

• No Batteries Required
• Merge Switch Sums Stereo Instruments
• Low Cut/Polarity/Pad/Ground Switches

• Amp & Cab Simulator in Pedal Form
• Combo, Stack & 4x12 Cab Settings
• Presence Switch to Add Highs
• 180° Polarity Reverse Switch
• Ground Lift Switch

• Active Signal Patch
• Eliminates Hum and Buzz common to PCs
• 1/4" / RCA / 3.5mm Inputs for Any Source
• -15 dB Pad, Ground Lift Switch
• 48V Phantom Powered

• Eliminates Hum & Buzz from Ground Loops
• Zero Phase & Harmonic Distortion
• Jensen Transformer Equipped

• Single Channel
• 4-Bands
• High and Low Pass Filters
• XLR, 1/4" and RCA I/O
• AC Adapter Included

• Connect a Computer to a PA or Mixer
• Built-In 24-Bit / 96 kHz Convertor
• 2 x Balanced XLR 3-Pin Outputs
• 3.5mm Stereo Headphone Output
• USB Type-B Input
• Operates on USB Bus Power

• 3x Stereo Pairs of 1/4" TRS Speaker Outs
• 2x Stereo Pairs of 1/4" TRS Inputs
• 1x Stereo RCA & 1x Stereo 1/8" Aux Input
• 1x Stereo S/PDIF Digital Input
• 4x 1/4" TRS Stereo Headphone Outs

• Advanced CDCM HD and F.I.R.E. Modeling System
• Core-Dual-DSP-Platform
• Armory
• Authentic Acoustic Sound
• Touch Screen Interface
• Essential I/O

• Equipped with Jensen Transformers
• -15 dB Pad Per Channel
• Flat Frequency Response
• Transformer-Isolated I/O
• 14-Gauge Steel Construction

• Stereo Version of J48
• Low Distortion
• -15 dB Pad
• High-Pass Filter at 80 Hz
• Retains Instrument's Tone
• 14-Gauge Steel Construction

• Packed with immersive, atmospheric reverbs.
• Switchable line- and instrument-level stereo operation.
• Integrated 8-step sequencer with auto-advance.
• Powerful SHARC DSP with 32-bit floating-point processing.

• Compact, easy-to-use amp modeler & effects processor
• New-gen CDCM & F.I.R.E. modeling system ensures high end tonal expressiveness and realistic playing experience
• Powerful, upgraded dual DSP-powered platform ensures excellent sound quality
• 24-bit signal processing, up to 120dB S/N ratio
• 4-inch 800 x 480 sharp color touch screen with instant control
• 18V DC high voltage power supply for huge dynamic range

• LED Backlit VU Input/Output Level Metering
• VCA-Less Vactrol Opto-Compression Design
• Accurate Ten Segment LED Gain Reduction Metering
• Active Balanced XLR And 1/4-Inch Inputs & Outputs

• 2 channels
• 19 inch rack size

• SSL Highpass & Lowpass Filters
• Wet/Dry Mix Control

• Single-Channel Limiting Amplifier
• Ultra-Fast Attack Time
• "All Buttons In" Feature
• CineMag Input and Output Transformers
• Class-A Line-Level Output Amplifier

• Single-Channel, Solid-State Compressor
• Switchable Sidechain High-Pass Filter
• Selectable High- and Low-Pass Filters
• Dry/Wet Mix Control
• Adjustable Attack and Release Times

• Recreation of Pultec EQP-1A
• Aesthetics and Sonics of the Original
• CineMag Transformers and Premium Tubes
• Fully Discrete Design
• Five Added Frequency Points