Processors & Effects

• For Keyboards
• 2 x 1/4" Inputs with Thru Outputs
• -15 dB Pad for Active Instruments
• Handles Huge Transients without Chocking

• For Stage & Home Recording Studio Use
• Handles High-Output Instruments
• Transformer Isolated, No Ground Loops

• No Batteries Required
• Merge Switch Sums Stereo Instruments
• Low Cut/Polarity/Pad/Ground Switches

• Eliminates Hum & Buzz from Ground Loops
• Zero Phase & Harmonic Distortion
• Jensen Transformer Equipped

• Unbalanced 1/4" Inputs.
• Balanced XLR Outputs.
• Passive Operation.
• Ground Lift.

• For Multimedia Applications
• Mono 1/4", Stereo RCA, and 3.5mm Inputs
• Mono XLR Line-Level Input
• Mic-Level Mono Sum at XLR Out
• -15 dB Pad

• 16 Voice Effects
• Compression, Reverb, Delay, and Enhance
• Adds up to 2 Voices for 3-Part Harmonies
• XLR Mic Input with 48V Phantom Power
• 3.5mm Stereo Aux Input

• Recreation of Pultec EQP-1A
• Aesthetics and Sonics of the Original
• CineMag Transformers and Premium Tubes
• Fully Discrete Design
• Five Added Frequency Points

• 4 Tube Design
• Dual Cinemag Transformers
• Kenetek Opto-Cell
• Discrete Signal Path

• Passive re-amping device
• Allows for playing prerecorded tracks through amplifiers and pedals and re-record the results
• Level control for fine tuning the gain
• Ground lift switch, when activated helps to reduce hum and buzz caused by ground loops

• Balanced XLR Outputs
• Transformer Isolation
• Provides Ground Isolation
• Stereo/Mono Switch
• USB Powered

• Stereo Version of J48
• Low Distortion
• -15 dB Pad
• High-Pass Filter at 80 Hz
• Retains Instrument's Tone
• 14-Gauge Steel Construction

• 4 modes of operation
• External side-chain inputs and sends
• Authentic SSL Bus Compressor circuit
• LOW THD Mode
• Negative Ratios
• 100% analogue circuit, controlled digitally

• 3x Stereo Pairs of 1/4" TRS Speaker Outs
• 2x Stereo Pairs of 1/4" TRS Inputs
• 1x Stereo RCA & 1x Stereo 1/8" Aux Input
• 1x Stereo S/PDIF Digital Input
• 4x 1/4" TRS Stereo Headphone Outs

• Increased Dynamic Range and Headroom
• 48V Phantom Powered & Switching Supply
• -15 dB Pad Switch

• Dual Channel.
• Stereo or Dual-Mono.
• Classic dbx "Auto" Mode.
• Side Chain Insert.
• Separate LED Displays.

• Unbalanced 1/4" and XLR Inputs.
• Balanced XLR Output.
• Battery or Phantom Powered.

• Connect a Computer to a PA or Mixer
• Built-In 24-Bit / 96 kHz Convertor
• 2 x Balanced XLR 3-Pin Outputs
• 3.5mm Stereo Headphone Output
• USB Type-B Input
• Operates on USB Bus Power

• For the H9000

• Connect Line/Hi-Z Signals to Mic Inputs.
• 1/4" Input.
• Parallel Thru-Put for Amp Connections.
• Line/Instrument Switch.
• Passive Design for Active Instruments.

• Connect Line/Hi-Z Signals to Mic Inputs.
• 1/4" Input.
• Parallel Thru-Put for Amp Connections.
• Line/Instrument Switch.
• Active Design for Passive Instruments.

• Input & Output Trim Controls
• Adjustable High-Pass Filter
• Selectable Mid-Side Insert Mode
• Input Overload LED, Stereo I/O Meter
• Stereo XLR I/O & Insert Connectors
• Occupies 2 RU of Rack Space

• Beating heart of the most iconic optical compressors ever made

• Connects a Mobile Device to a PA/Mixer
• 3.5mm TRS Male Plug on 5' Attached Cable
• Switchable -15 dB Pad
• Custom-Wound Transformers
• 2 x 1/4" TRS Outputs
• Balanced XLR 3-Pin Output

• TSAC-HD Pre-Effects and Amp Modeling
• Core-Image Post-Effects
• Quick Tone™ Edit Software
• Supports 3rd-party IRs to Expand Sound Ability
• 56 Drum Beats & 60sec Phrase Loop Synchronization
• Global 3 Bands EQ for Quick Adjustment

• Single-Channel Limiting Amplifier
• Ultra-Fast Attack Time
• "All Buttons In" Feature
• CineMag Input and Output Transformers
• Class-A Line-Level Output Amplifier

• Selectable Active/Passive Pickup Input.
• Z-Tone Variable Impedance.
• Switchable Pure/JFET Channel Tone.
• Buffers Signal for Long Cable Runs.
• Boost Circuit Adds Volume and Drive.

• Vintage-style 4-band parametric equalization
• Inspired by classic 1970s-era analog equipment
• Delivers classic sonic clarity and control at an affordable price
• Stereo operation with one set of controls for both channels
• Accurate, indented potentiometers provide precision for quick and easy recall

• 12 dB/Octave Rolloff
• Stereo RCA Input and Outputs
• 50 Hz to 2.5 kHz Crossover Range
• Mono Sub Output
• External Power Supply for Low Noise Operation

• Selectable Active/Passive Pickup Input.
• Z-Tone Variable Impedance.
• Switchable Pure/JFET Channel Tone.
• Switchable -20 dB Pad.
• 1/4" Thru and Main Outputs.

• Channel strip for studio and live sound
• Switchable for mic, line, or instrument-level signals
• Switchable 48V phantom power and phase reverse
• Program-adaptive Gate, VCA compressor, De-esser, and EQ
• Multiband "Tube Saturation" feature for subtle warming effects
• Limiter on the output stage with a preset threshold (+16dB)

• 3-band stereo compressor for mixing and mastering
• FET compression reacts fast with a soft knee
• High-grade signal path all the way through, with impeccable left/right tracking across the full compression range
• Variable crossover frequencies, with mute and bypass switches for easy monitoring of each band
• Big and Air modes adds low-end body and high-end sparkle

• Pristine Audio Fidelity
• Ground Lift Switch
• Voltage Gain Selector

• Packed with immersive, atmospheric reverbs.
• Switchable line- and instrument-level stereo operation.
• Integrated 8-step sequencer with auto-advance.
• Powerful SHARC DSP with 32-bit floating-point processing.

• Single Channel
• 4-Bands
• High and Low Pass Filters
• XLR, 1/4" and RCA I/O
• AC Adapter Included

• Classic VCA Compressor Design.
• Add Glue & Control Dynamics.
• Switchable CineMag Transformers.
• Sonic Transparency or Colourful Vibe.
• Selectable High-Pass Filter.

• Single Channel
• Battery or Phantom Powered
• Ground Lift
• Input Pad
• Rugged Enclosure

Passive DI Box. Instrument/Line in switch. Ground lift switch to eliminate hum.

• Dual Channel
• Passive
• 1/4" Mono, 1/8" Stereo and RCA Inputs
• Input Level Controls
• Ground Lift Switches

• Active.
• Polarity Switch.
• Ground Lift Switch.
• Rugged Construction.

• Premium Performance.
• Rugged Design.
• Stackable Chassis with Durable Rubber Foot.
• Gold-plated Neutrik XLR Connector.

• LED Backlit VU Input/Output Level Metering
• VCA-Less Vactrol Opto-Compression Design
• Accurate Ten Segment LED Gain Reduction Metering
• Active Balanced XLR And 1/4-Inch Inputs & Outputs