Studio Monitors

• Mixing, Video, Recording, Podcasting
• Over-Ear, Sound-Isolating Design
• Closed-Back Design
• 40mm Custom-Matched Dynamic Drivers
• 5 Hz to 35 kHz Frequency Response

• 130 mm Composite Sandwich Woofer Cone
• 25 mm Titanium Dome Tweeter
• 160 W Peak Analogue AB Amplifier
• Elliptical Modelled Dispersion Waveguide
• Wide Horizontal Dispersion

• For Studio Recording, Mixing, Mastering
• Acoustic Tuning Adjustment Controls
• 1" Silk Dome Tweeter for Treble
• 4.5" Kevlar Woofer Cone for Bass
• 25W Class AB Amplification

• Compact Speakers for Content Creation.
• For Gaming, Monitoring, and More.
• Bluetooth 5.0 Streaming.
• 3.5" Woven Composite Woofer.
• 1" Silk-Dome Tweeter.

• 2x 3/4" Tweeters
• 2x 3" Woofers
• Bluetooth Capability
• 2x RCA Inputs
• 1x 3.5mm Input

• 120W Total Output
• 203 mm Cone Woofer
• 25 mm Dome Tweeter
• Room Control Response Switch
• High Trim

• Compact Speakers for Content Creation
• For Gaming, Monitoring, and More
• Bluetooth 5.0 Streaming
• 4.5" Woven Composite Woofer
• 1" Silk-Dome Tweeter

• 70W Total Output
• 127 mm Cone Woofer
• 25 mm Dome Tweeter
• Room Control Response Switch
• High Trim

• DSP engine included
• Higher SPL
• Better resolution
• Linear frequency and phase response
• Even deeper bass

• 2-way bass-reflex bi-amplified nearfield studio monitor
• 5" cone woofer and 1" dome tweeter
• 54Hz - 30kHz frequency response
• 45W LF plus 25W HF bi-amp system for total 70W power amplification
• ROOM CONTROL and HIGH TRIM response controls
• XLR and TRS phone jack inputs, balanced or unbalanced

• 95W Total Output
• 165 mm Cone Woofer
• 25 mm Dome Tweeter
• Room Control Response Switch
• High Trim

• For Music Production and Video Editing
• 0.75" Dome Tweeter and 3.5" Cone Woofer
• 26W Output Power per Speaker
• 3-Way 500 Hz Room Control Switch
• 3-Way 2 kHz HF Trim Switch
• Wide Frequency Response

• For Music Production and Video Editing
• 1" Dome Tweeter and 4.5" Cone Woofer
• 26W Output Power per Speaker
• 3-Way 500 Hz Room Control Switch
• 3-Way 2 kHz HF Trim Switch
• Wide Frequency Response

• Compact Speakers for Content Creation
• For Gaming, Monitoring, and More
• 3.5" Woven Composite Woofer
• 1" Silk-Dome Tweeter
• Low- and High-Frequency Adjustment
• Class A/B Amplifier

• 5" Woofer
• 1" Soft Dome Tweeter
• Bi-Amped Class-D Amplifier: 2 x 50W
• Frequency Response: 50 Hz to 21 kHz
• 24-Bit / 96 kHz Signal Path and DSP
• Sensitivity: 3 Settings

• Improve the sound of your existing amps and speakers.
• Ideal for heavy guitar and bass cabinets and PA speakers.
• Decouples your speakers from supporting surfaces.
• Helps to minimise vibrational resonance into coupled surfaces and mic stands.

• 95W Total Output.
• 165 mm Cone Woofer.
• 25 mm Dome Tweeter.
• Room Control Response Switch.
• High Trim.

• For Music Production and Video Editing
• 1" Dome Tweeter and 4.5" Cone Woofer
• 26W Output Power per Speaker
• 3-Way 500 Hz Room Control Switch
• 3-Way 2 kHz HF Trim Switch
• Wide Frequency Response

Speaker Decoupler, Horizontal-Fire Profile, For Speakers up to 144 lbs (65kg)

• DSP engine included
• Higher SPL
• Better resolution
• Linear frequency and phase response
• Even deeper bass

• For Music Production and Video Editing
• 0.75" Dome Tweeter and 3.5" Cone Woofer
• 26W Output Power per Speaker
• 3-Way 500 Hz Room Control Switch
• 3-Way 2 kHz HF Trim Switch
• Wide Frequency Response

• 120W Total Output.
• 203 mm Cone Woofer.
• 25 mm Dome Tweeter.
• Room Control Response Switch.
• High Trim.

• Ultra-low noise and transparent circuit design
• Source switches may be active in any combination
• 4 inputs: SPDIF (192kHz/24Bit), 2 analog balanced 1/4" stereo, 3.5mm front-panel Aux jack
• 3 pairs of speakers plus a mono sub may be switched individually and simultaneously or provide A/B comparisons

Speaker Decoupler, Horizontal-Fire Profile, For Speakers up to 32 lbs (15kg)

• 4" Woofer, ¾" Tweeter
• 50W Bass Amplifier
• 50W Treble Amplifier
• Auto-Switching to Standby Saves Power
• Class-D Amplification

• 74 to 20,000 Hz Frequency Response
• 3/4" Metal Dome Tweeter for Treble
• 76.2 mm Woofer for Bass
• Bass Tilt Control
• Aluminium Minimum Diffraction Enclosure

• 7" Woofer
• 1" Soft Dome Tweeter
• Bi-Amped Class-D Amplifier: 2 x 50W
• Frequency Response: 45 Hz to 21 kHz
• 24-Bit / 96 kHz Signal Path and DSP
• Sensitivity: 3 Settings

• Bi-amplified design with 150 watts (80 LF, 70 HF) for powerful, accurate sound
• 8” Kevlar low-frequency driver with high-temp voice coil and damped rubber surround
• 25” natural silk dome tweeter delivers superb transient details
• Computer-optimized tweeter waveguide for precise imaging
• Acoustic Space Control to fine-tune low-end response to your room

• Monitor Controller for Stereo Speakers
• Stream Bluetooth to Wired Speakers
• Add Subwoofer to Stereo Setup
• Prominent Volume Dial
• Headphone Output for Private Monitoring

• 8" Woofer
• 4" Mid-Woofer
• 1" Soft Dome Tweeter
• Tri-Amped: 50W / 50W / 80W Class-D
• 24-Bit / 96 kHz Signal Path and DSP
• Frequency Response: 40 Hz to 21 kHz

• 8" Woofer
• 4" Mid-Woofer
• 1" Soft Dome Tweeter
• Tri-Amped: 50W / 50W / 80W Class-D
• 24-Bit / 96 kHz Signal Path and DSP
• Frequency Response: 40 Hz to 21 kHz

• Sized for iLoud Micro Monitors
• Zippered Pouch for Accessories
• Adjustable Shoulder Straps

• 38mm Neodymium Drivers
• Circumaural, Sound-Isolating Design
• Foldable Design
• Comfortable Memory Foam Earcups
• Linear Response Between 12 Hz to 34 kHz

• 165 mm Woofer, 19 mm Tweeter
• 90W Bass Amplifier, 90W Treble Amplifier
• Auto Switching to Standby Saves Power
• Curved Edges Reduce Distortions
• Wide On and Off Axis Response

• 205 mm Woofer, 25 mm Tweeter
• 150W Bass Amplifier
• 120W Treble Amplifier
• Auto Switching to Standby Saves Power
• Curved Edges Reduce Distortions

• All-in-One Acoustic Room Correction
• Works with Any Interface and Computer
• Latency-Free, Set-and-Forget Correction
• Improves Frequency and Stereo Balance
• Avoids Drastic AEQ Changes to Room
• Work Faster and Create Better Mixes

• Reference-Class Performance
• 6.5" Woofer + 1" Tweeter
• Bi-Amped: LF 145W, HF 100W
• Modelled Dispersion Waveguide
• DSP Engine
• 39 Hz to 21 kHz Frequency Response

• 8" Woofer (80W)
• 1" Soft-Dome Tweeter (50W)
• Biamped Class-D Amplifier
• Frequency Response: 45 Hz to 21 kHz
• 24-Bit / 96 kHz Signal Path and DSP
• Sensitivity: 3 Settings

• DSP engine included
• Higher SPL
• Better resolution
• Linear frequency and phase response
• Even deeper bass

• Ultra-low noise and transparent circuit design
• Linear power supply with low hum toroidal transformer and internal voltage selector switch
• Three balanced stereo speaker outputs, plus a dedicated mono speaker/sub-woofer output
• All outputs with individual L/R trims under unit to provide complete control over level matching
• Timed relay protection on all speaker outputs to prevent power up/down thumps.

• DSP engine included
• Higher SPL
• Better resolution
• Linear frequency and phase response
• Even deeper bass

• Reference-Class Performance
• 6.5" Woofer + 1" Tweeter
• Bi-Amped: LF 145W, HF 100W
• Modelled Dispersion Waveguide
• DSP Engine
• 39 Hz to 21 kHz Frequency Response

• Elegant design
• Compatible with EU installation materials
• Signal transmission over twisted pair
• Signal transmission insensitive

• 7" Woofer
• 4" Mid-Woofer
• 1" Tweeter
• Tri-Amped: 150W / 500W / 500W Class-D
• 24-Bit / 192 kHz Signal Path and DSP
• 44 Hz to 27 kHz (±3 dB)

• 7" Woofer
• 4" Mid-Woofer
• 1" Tweeter
• Tri-Amped: 150W / 500W / 500W Class-D
• 24-Bit / 192 kHz Signal Path and DSP
• 44 Hz to 27 kHz (±3 dB)

• 8" Woofer (80W)
• 1" Soft-Dome Tweeter (50W)
• Biamped Class-D Amplifier
• Frequency Response: 45 Hz to 21 kHz
• 24-Bit / 96 kHz Signal Path and DSP
• Sensitivity: 3 Settings

• 1" Esotar Pro Tweeter
• 5" MSP Mid-Woofer
• 9" Glass-Fiber Woofer
• Triamped: 150 / 500 / 500 Class-D
• 24-Bit / 192 kHz Signal Path and DSP
• Frequency Response: 36 Hz to 31 kHz

• 8" Woofers (80W)
• 1" Soft-Dome Tweeters (50W)
• Biamped Class-D Amplifier
• Frequency Response: 45 Hz to 21 kHz
• 24-Bit / 96 kHz Signal Path and DSP
• Sensitivity: 3 Settings

• 1" Esotar Pro Tweeter
• 7" MSP Glass-Fibre Woofer
• Biamped: 150/500 Class-D
• 24-Bit / 192 kHz Signal Path and DSP
• Frequency Response: 38 Hz to 31 kHz
• Analog and Digital Inputs with Wordclock

• 4 x 9" Woofers
• 2 x 500W Class D Amplifiers
• XLR Analog and AES Digital Connections
• Uses CORE DSP System
• Use Up to 3 Subs at Once
• 13.5 Hz to 200 Hz Frequency Range

• 5" Woofer
• 1" Soft Dome Tweeter
• Bi-Amped Class-D Amplifier: 2 x 50W
• Frequency Response: 50 Hz to 21 kHz
• 24-Bit / 96 kHz Signal Path and DSP
• Sensitivity: 3 Settings

• 7" Woofer
• 1" Soft Dome Tweeter
• Bi-Amped Class-D Amplifier: 2 x 50W
• Frequency Response: 45 Hz to 21 kHz
• 24-Bit / 96 kHz Signal Path and DSP
• Sensitivity: 3 Settings

• Dual 9.5" MSP+ Hybrid Drive Woofers
• Class-D 500W Amplifier
• Sealed Enclosure
• Frequency Range: 16 to 230 Hz
• Advanced Onboard DSP
• Presets for Dynaudio Monitors

• 9.5" Long-Throw MSP Woofer
• Class-D 300W Amplifier
• Sealed Enclosure
• Frequency Range: 22 to 175 Hz
• Adjustable LP Filter (50 to 150 Hz)
• Selectable HP Filter (Flat, 60, 80 Hz)

• Ultra low noise and transparent circuit design.
• Source switches for both Main & Cue can be active in any combination. 5 Inputs in Total - 1x Digital AES/SPDIF Neutrik XLR/JACK COMBI & 2 balanced analogue Neutrik XLR/JACK COMBI and 1 stereo RCA Analogue on the Rear Panel & 1 3.5mm Front Panel Aux.
• 3x Speakers Plus a Mono Sub can be switched individually & simultaneously or give A/B comparisons. Each has level trims to provide precise channel matching.

• Pristine, ultra low noise & transparent circuit design gives you an accurate representation of your mix whether it be surround or stereo.
• Each of the eight 7.1 speakers can be cut or soloed individually.
• Stereo outputs (including those mixed down from surround) can be monitored via the main stereo speaker outputs or the FL and FR from the surround speakers.

• Compact 8-channel monitor controller
• Ultra-low noise and transparent circuit design
• Covers 5.1, 7.1, quadraphonic, DTS, Dolby Digital EX, THX Surround EX, DTS-HD, Dolby Atmos, and more
• Large, ultra-precise volume knob supplies smooth volume changes
• Stereo Mix switch enables you to check your surround mix in stereo

Speaker Decoupler, 10° Up-Fire Profile, For Speakers up to 44 lbs (20kg)

Speaker Decoupler, 5° Down-Fire Profile, For Speakers up to 50 lbs (22kg)

Speaker Decoupler, Horizontal-Fire Profile, For Speakers up to 50 lbs (22kg)

Speaker Decoupler, 10° Up-Fire Profile, For Speakers up to 32 lbs (15kg)

Speaker Decoupler, Horizontal-Fire Profile, For Speakers up to 44 lbs (20kg)

Speaker Decoupler, Horizontal-Fire Profile, For Speakers up to 88 lbs (40kg)

• 8" Woofer
• 4" Mid-Woofer
• 1" Soft Dome Tweeter
• Tri-Amped: 50W / 50W / 80W Class-D
• 24-Bit / 96 kHz Signal Path and DSP
• Frequency Response: 40 Hz to 21 kHz

• 8" Woofer
• 4" Mid-Woofer
• 1" Soft Dome Tweeter
• Tri-Amped: 50W / 50W / 80W Class-D
• 24-Bit / 96 kHz Signal Path and DSP
• Frequency Response: 40 Hz to 21 kHz