Speakers & Headphones

Exclusively for Use with the Sonos Beam, Works with Mounts for 37 to 70" Displays, Interfaces with Your Display Mount, Broad VESA Compatibility

Speaker Decoupler, Horizontal-Fire Profile, For Speakers up to 50 lbs (22kg)

Speaker Decoupler, 5° Down-Fire Profile, For Speakers up to 50 lbs (22kg)

Speaker Decoupler, 10° Up-Fire Profile, For Speakers up to 44 lbs (20kg)

Speaker Decoupler, Horizontal-Fire Profile, For Speakers up to 44 lbs (20kg)

Speaker Decoupler, 10° Up-Fire Profile, For Speakers up to 32 lbs (15kg)

Speaker Decoupler, Horizontal-Fire Profile, For Speakers up to 32 lbs (15kg)

Speaker Decoupler, Horizontal-Fire Profile, For Speakers up to 88 lbs (40kg)

• Sized for iLoud Micro Monitors
• Zippered Pouch for Accessories
• Adjustable Shoulder Straps

• 120W Total Output.
• 203 mm Cone Woofer.
• 25 mm Dome Tweeter.
• Room Control Response Switch.
• High Trim.

• 95W Total Output.
• 165 mm Cone Woofer.
• 25 mm Dome Tweeter.
• Room Control Response Switch.
• High Trim.

• Bi-amplified design with 150 watts (80 LF, 70 HF) for powerful, accurate sound
• 8” Kevlar low-frequency driver with high-temp voice coil and damped rubber surround
• 25” natural silk dome tweeter delivers superb transient details
• Computer-optimized tweeter waveguide for precise imaging
• Acoustic Space Control to fine-tune low-end response to your room

• Ultra-low noise and transparent circuit design
• Linear power supply with low hum toroidal transformer and internal voltage selector switch
• Three balanced stereo speaker outputs, plus a dedicated mono speaker/sub-woofer output
• All outputs with individual L/R trims under unit to provide complete control over level matching
• Timed relay protection on all speaker outputs to prevent power up/down thumps.

• Compact 8-channel monitor controller
• Ultra-low noise and transparent circuit design
• Covers 5.1, 7.1, quadraphonic, DTS, Dolby Digital EX, THX Surround EX, DTS-HD, Dolby Atmos, and more
• Large, ultra-precise volume knob supplies smooth volume changes
• Stereo Mix switch enables you to check your surround mix in stereo

• Ultra-low noise and transparent circuit design
• Source switches may be active in any combination
• 4 inputs: SPDIF (192kHz/24Bit), 2 analog balanced 1/4" stereo, 3.5mm front-panel Aux jack
• 3 pairs of speakers plus a mono sub may be switched individually and simultaneously or provide A/B comparisons

• All-in-One Acoustic Room Correction
• Works with Any Interface and Computer
• Latency-Free, Set-and-Forget Correction
• Improves Frequency and Stereo Balance
• Avoids Drastic AEQ Changes to Room
• Work Faster and Create Better Mixes

• Solid and stable wall mount
• Adjustable boom
• 210 to 340 mm clamping range
• 200mm in width

• 8" Woofers (80W)
• 1" Soft-Dome Tweeters (50W)
• Biamped Class-D Amplifier
• Frequency Response: 45 Hz to 21 kHz
• 24-Bit / 96 kHz Signal Path and DSP
• Sensitivity: 3 Settings

• 8" Woofer (80W)
• 1" Soft-Dome Tweeter (50W)
• Biamped Class-D Amplifier
• Frequency Response: 45 Hz to 21 kHz
• 24-Bit / 96 kHz Signal Path and DSP
• Sensitivity: 3 Settings

• 7" Woofer
• 1" Soft Dome Tweeter
• Bi-Amped Class-D Amplifier: 2 x 50W
• Frequency Response: 45 Hz to 21 kHz
• 24-Bit / 96 kHz Signal Path and DSP
• Sensitivity: 3 Settings

• 7" Woofer
• 1" Soft Dome Tweeter
• Bi-Amped Class-D Amplifier: 2 x 50W
• Frequency Response: 45 Hz to 21 kHz
• 24-Bit / 96 kHz Signal Path and DSP
• Sensitivity: 3 Settings

• 8" Woofer (80W)
• 1" Soft-Dome Tweeter (50W)
• Biamped Class-D Amplifier
• Frequency Response: 45 Hz to 21 kHz
• 24-Bit / 96 kHz Signal Path and DSP
• Sensitivity: 3 Settings

• 8" Woofer
• 4" Mid-Woofer
• 1" Soft Dome Tweeter
• Tri-Amped: 50W / 50W / 80W Class-D
• 24-Bit / 96 kHz Signal Path and DSP
• Frequency Response: 40 Hz to 21 kHz

• 9.5" Long-Throw MSP Woofer
• Class-D 300W Amplifier
• Sealed Enclosure
• Frequency Range: 22 to 175 Hz
• Adjustable LP Filter (50 to 150 Hz)
• Selectable HP Filter (Flat, 60, 80 Hz)

• Dual 9.5" MSP+ Hybrid Drive Woofers
• Class-D 500W Amplifier
• Sealed Enclosure
• Frequency Range: 16 to 230 Hz
• Advanced Onboard DSP
• Presets for Dynaudio Monitors

• Titltable, Stable Shelf for Monitors
• 12.5° Angle Adjustment Range
• Additional Stop Angle for Security
• Felt Pads for Noise Filtration
• Height Adjustable Range of 31.5 to 51.2"
• 10 Height Positions in 2" Increments

• Elegant design
• Compatible with EU installation materials
• Signal transmission over twisted pair
• Signal transmission insensitive

• Reference-Class Performance
• 6.5" Woofer + 1" Tweeter
• Bi-Amped: LF 145W, HF 100W
• Modelled Dispersion Waveguide
• DSP Engine
• 39 Hz to 21 kHz Frequency Response

• Reference-Class Performance
• 6.5" Woofer + 1" Tweeter
• Bi-Amped: LF 145W, HF 100W
• Modelled Dispersion Waveguide
• DSP Engine
• 39 Hz to 21 kHz Frequency Response

• 38mm Neodymium Drivers
• Circumaural, Sound-Isolating Design
• Foldable Design
• Comfortable Memory Foam Earcups
• Linear Response Between 12 Hz to 34 kHz

• 95W Total Output
• 165 mm Cone Woofer
• 25 mm Dome Tweeter
• Room Control Response Switch
• High Trim