Processors & Effects

• 16 Voice Effects
• Compression, Reverb, Delay, and Enhance
• Adds up to 2 Voices for 3-Part Harmonies
• XLR Mic Input with 48V Phantom Power
• 3.5mm Stereo Aux Input

• Balanced XLR Outputs
• Transformer Isolation
• Provides Ground Isolation
• Stereo/Mono Switch
• USB Powered

• For Multimedia Applications
• Mono 1/4", Stereo RCA, and 3.5mm Inputs
• Mono XLR Line-Level Input
• Mic-Level Mono Sum at XLR Out
• -15 dB Pad

• Selectable Active/Passive Pickup Input.
• Z-Tone Variable Impedance.
• Switchable Pure/JFET Channel Tone.
• Switchable -20 dB Pad.
• 1/4" Thru and Main Outputs.

• For Keyboards
• 2 x 1/4" Inputs with Thru Outputs
• -15 dB Pad for Active Instruments
• Handles Huge Transients without Chocking

• For Stage & Home Recording Studio Use
• Handles High-Output Instruments
• Transformer Isolated, No Ground Loops

• Two by Two Monitor Controller
• 2x Sources and 2x Monitor Pairs
• Classic Big Knob Volume Control
• Mono, Mute, and Dim Functions
• Pristine Audio Quality

• Input & Output Trim Controls
• Adjustable High-Pass Filter
• Selectable Mid-Side Insert Mode
• Input Overload LED, Stereo I/O Meter
• Stereo XLR I/O & Insert Connectors
• Occupies 2 RU of Rack Space

• Equipped with Jensen Transformers
• -15 dB Pad Per Channel
• Flat Frequency Response
• Transformer-Isolated I/O
• 14-Gauge Steel Construction

• Passive re-amping device
• Allows for playing prerecorded tracks through amplifiers and pedals and re-record the results
• Level control for fine tuning the gain
• Ground lift switch, when activated helps to reduce hum and buzz caused by ground loops

• Unbalanced 1/4" Inputs.
• Balanced XLR Outputs.
• Passive Operation.
• Ground Lift.

• No Batteries Required
• Merge Switch Sums Stereo Instruments
• Low Cut/Polarity/Pad/Ground Switches

• Active Signal Patch
• Eliminates Hum and Buzz common to PCs
• 1/4" / RCA / 3.5mm Inputs for Any Source
• -15 dB Pad, Ground Lift Switch
• 48V Phantom Powered

• Eliminates Hum & Buzz from Ground Loops
• Zero Phase & Harmonic Distortion
• Jensen Transformer Equipped

• Connect a Computer to a PA or Mixer
• Built-In 24-Bit / 96 kHz Convertor
• 2 x Balanced XLR 3-Pin Outputs
• 3.5mm Stereo Headphone Output
• USB Type-B Input
• Operates on USB Bus Power

• Unbalanced 1/4" and XLR Inputs.
• Balanced XLR Output.
• Battery or Phantom Powered.

• Premium Performance.
• Rugged Design.
• Stackable Chassis with Durable Rubber Foot.
• Gold-plated Neutrik XLR Connector.

• 12 dB/Octave Rolloff
• Stereo RCA Input and Outputs
• 50 Hz to 2.5 kHz Crossover Range
• Mono Sub Output
• External Power Supply for Low Noise Operation

• Connects a Mobile Device to a PA/Mixer
• 3.5mm TRS Male Plug on 5' Attached Cable
• Switchable -15 dB Pad
• Custom-Wound Transformers
• 2 x 1/4" TRS Outputs
• Balanced XLR 3-Pin Output

• Single Channel
• 4-Bands
• High and Low Pass Filters
• XLR, 1/4" and RCA I/O
• AC Adapter Included

• Selectable Active/Passive Pickup Input.
• Z-Tone Variable Impedance.
• Switchable Pure/JFET Channel Tone.
• Buffers Signal for Long Cable Runs.
• Boost Circuit Adds Volume and Drive.

• Ultra compact amp modeler
• Dual-core DSP platform
• CDCM & F.I.R.E. modeling system
• 24-bit signal processing
• Iconic touch screen operation
• Editable effect chain

• Increased Dynamic Range and Headroom
• 48V Phantom Powered & Switching Supply
• -15 dB Pad Switch

• Advanced CDCM HD and F.I.R.E. Modeling System
• Core-Dual-DSP-Platform
• Armory
• Authentic Acoustic Sound
• Touch Screen Interface
• Essential I/O

• Compressor and Limiter
• Expander and Gate
• Five Segment LED Indicator Metres
• True RMS Convertor on Sidechain
• Linear or Logarithmic Release Curve

• SSL Highpass & Lowpass Filters
• Wet/Dry Mix Control

• Authentic recreation of SL 4000 B
• Design based on SSL Bus Compressor
• Feature Compressor/Limiter & Gate/Expander
• Feedback design with Peak sensing
• Fixed compression ratios
• Fixed release times

• TSAC-HD Pre-Effects and Amp Modeling
• Core-Image Post-Effects
• Quick Tone™ Edit Software
• Supports 3rd-party IRs to Expand Sound Ability
• 56 Drum Beats & 60sec Phrase Loop Synchronization
• Global 3 Bands EQ for Quick Adjustment

• Unique Dynamics Processor
• Unconventional Dynamic Reversal Feature
• Compression, Limiting, Expansion, Gating
• 1:1 to Infinite Comp Ratio and Beyond
• Side-Chain and Link I/O
• Transformer-Balanced XLR I/O

• Fast Reacting Stereo FET Design compressor with excellent Left/Right Tracking across the Full Range of compression and in a 1u rack mount housing.
• Threshold, Ratio, Attack and Release controls and Gain Reduction Metering provide familiar and intuative control over the audio. Anyone that knows how to use a compressor can operate the 1978.

• 3-band stereo compressor for mixing and mastering
• FET compression reacts fast with a soft knee
• High-grade signal path all the way through, with impeccable left/right tracking across the full compression range
• Variable crossover frequencies, with mute and bypass switches for easy monitoring of each band
• Big and Air modes adds low-end body and high-end sparkle

• Dual Channel
• 2 x 31-Band
• 1/3 Octave
• Switchable Boost/Cut Range
• 20mm Sliders
• 4-Segment LED Ladders

• Eventide Quality Effects
• Real-Time Control
• Tap Tempo
• MIDI
• Metal Footswitches

Passive DI Box. Instrument/Line in switch. Ground lift switch to eliminate hum.

• Stereo 2-Way, Mono 3-Way
• Subwoofer Output
• Linkwitz-Riley Filters
• Range Switch (x10)
• XLR Connectors

• 4 Independent DI Channels
• Works as a 4-Channel Mixer
• Accepts Balanced and Unbalanced Signals

• Channel strip for studio and live sound
• Switchable for mic, line, or instrument-level signals
• Switchable 48V phantom power and phase reverse
• Program-adaptive Gate, VCA compressor, De-esser, and EQ
• Multiband "Tube Saturation" feature for subtle warming effects
• Limiter on the output stage with a preset threshold (+16dB)

• 3x Stereo Pairs of 1/4" TRS Speaker Outs
• 2x Stereo Pairs of 1/4" TRS Inputs
• 1x Stereo RCA & 1x Stereo 1/8" Aux Input
• 1x Stereo S/PDIF Digital Input
• 4x 1/4" TRS Stereo Headphone Outs

• Packed with immersive, atmospheric reverbs.
• Switchable line- and instrument-level stereo operation.
• Integrated 8-step sequencer with auto-advance.
• Powerful SHARC DSP with 32-bit floating-point processing.

• Dual Channel.
• Stereo or Dual-Mono.
• Classic dbx "Auto" Mode.
• Side Chain Insert.
• Separate LED Displays.

• Route a Stereo Instrument to Mic Inputs
• Converts Unbalanced to Balanced
• Converts High Impedance to Low Impedance
• Two 1/4" Unbalanced Inputs
• Two 1/4" TS Through Jacks

• 3-band, 500 Series EQ that delivers classic Neve sound
• 8k/16k HF peak/shelf
• Selectable MF boost/cut with Hi-Q
• Selectable peak/shelf LF boost/cut
• 80Hz highpass filter

• Based on Design of 2254 Compressor
• Dynamics-Taming with Colour
• Threshold, Ratio & Timing Controls
• Blend, Gain & Sidechain High-Pass Filter
• Detented Controls for Recall
• Single-Channel with Linkable Operation

• Balancing and impedance matching
• Eliminates ground loop hum
• 4 independent DI boxes in a solid 19" housing (1U)
• Higher output level than a passive DI box
• THRU-output for passing the input signal
• Pure and unaltered low-noise audio

• Connecting devices with unbalanced or balanced outputs
• Eliminates ground loop hum
• Combo inputs
• 2 balanced XLR outputs per channel
• Ground-lift switch for each output
• Solid 19" housing, 1U

• Eliminates ground loop hum
• 4 independent DI boxes in a solid 19" housing (1U)
• THRU-output for passing the input signal
• Pure and unaltered low-noise audio
• Handles even high-level inputs
• Ground-lift switch for each output